20 Openings Veneer Hot Press

Our Company Established in 2007,Zhangzhou Xinhuacheng Machinery Manufacturing Co.,Ltd is a manufacturer and trader specialized in the research, development and production of all kinds of plywood machine(hot press,cold press,glue spreader,glue mixer and so on). We are located in Fujian , China,...
Chat Now

Product Details

120layers hot press  Specification
Model:XHC48-20-3-320-52-7020Openings 600T
Total pressure 600T
Board feeding direction Transverse
Layers 20 layers
Layer spacing 70MM
Hot press plate Number of hot press plate:21pcs
Size:2700*1350*52(single inlet and outlet)
Material:Q235
 Cylinder for hot press machine (3pcs)3PCS(cylinders)*320mm
Wuxi cylinder
Seal:4pcs rubber seals per pcs of cylinder
Stroke:1200mm
Hydraulic system for hot press machine Compression resistance:25Mpa
Low pressure pump flowing:315ML/R
High pressure pump flowing:31ML/R
Motor power:15kw+15kw+15kwjust for hot press 
Closing time:20s
Overall dimension 3555*1350*5486mm
Weightabout 66T

Heating treatment
Thickness of the frame Composite frame :AssembleDetachable
Upper and bottom beam:1000mm and900mm
Main boby:30mm,Q235
Middle beam:450mm
2 Table lift(gantry-type) Overall dimension:3960x1250x5500MM
2*63mm
Working stroke:1400mm
Weight:About 1.5T
Load bearing:about 2T
3Feeding in20 openings
4Feeding out20 openings,with 4 pcs fans+for one panel
5automatic constant temperature systemDN50for steam
6
Process 3mm plywood
Notes:1:PLC (VIGOR http://www.vigorplc.com.tw) AND TOUCHGREEN(PANELMASTER http://www.panelmaster.com.cn )FROM TAIWAN.
2:Relays(abb from Swiss),contactor switch(SHILIN from Taiwan)
3:Logic valve(JIUGANG from Taiwan),Power(BIAOSHEN from China)


4:Heating treatment:the annealing furnace is  one of the highlights in our company.When the machine are finished the weld,it will be put into the annealing furnace which increases the tenacity and prolonged the durable use.

120layers hot press  Specification
Model:XHC48-20-3-320-52-7020Openings 600T
Total pressure 600T
Board feeding direction Transverse
Layers 20 layers
Layer spacing 70MM
Hot press plate Number of hot press plate:21pcs
Size:2700*1350*52(single inlet and outlet)
Material:Q235
 Cylinder for hot press machine (3pcs)3PCS(cylinders)*320mm
Wuxi cylinder
Seal:4pcs rubber seals per pcs of cylinder
Stroke:1200mm
Hydraulic system for hot press machine Compression resistance:25Mpa
Low pressure pump flowing:315ML/R
High pressure pump flowing:31ML/R
Motor power:15kw+15kw+15kwjust for hot press 
Closing time:20s
Overall dimension 3555*1350*5486mm
Weightabout 66T

Heating treatment
Thickness of the frame Composite frame :AssembleDetachable
Upper and bottom beam:1000mm and900mm
Main boby:30mm,Q235
Middle beam:450mm
2 Table lift(gantry-type) Overall dimension:3960x1250x5500MM
2*63mm
Working stroke:1400mm
Weight:About 1.5T
Load bearing:about 2T
3Feeding in20 openings
4Feeding out20 openings,with 4 pcs fans+for one panel
5automatic constant temperature systemDN50for steam
6
Process 3mm plywood
Notes:1:PLC (VIGOR http://www.vigorplc.com.tw) AND TOUCHGREEN(PANELMASTER http://www.panelmaster.com.cn )FROM TAIWAN.
2:Relays(abb from Swiss),contactor switch(SHILIN from Taiwan)
3:Logic valve(JIUGANG from Taiwan),Power(BIAOSHEN from China)


4:Heating treatment:the annealing furnace is  one of the highlights in our company.When the machine are finished the weld,it will be put into the annealing furnace which increases the tenacity and prolonged the durable use.

Our Company

Established in 2007,Zhangzhou Xinhuacheng Machinery Manufacturing Co.,Ltd is a manufacturer and trader specialized in the research, development and production of all kinds of plywood machine(hot press,cold press,glue spreader,glue mixer and so on). We are located in Fujian , China, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
"Beginning with customer demand,ending up with customer satisfaction" is our core activity and permanent promise, That is we will take action to return with satisfaction as long as we are bestowed a chance to serve our customers opportunities and challenges coexist in 21st century. we have good faith in our future and will do our utmost efforts to pace with the time, live up to expectations, work hard to build up the first flat die brand.
We do hope to be your friends forever, may we make common progress.

We like to challenge everything in the woodworking machine.We do our best to save the human cost in the line of workshop.There is one factory for us to test.Automatic machine instead of workers is trend in recent years.Now we are fighting for it.Also we have produced some effects for this.Like the hot press,if you need semi-automatic 25 openings hot press ,there two person can charge for 2 sets of hot press.

If you are interested in it,welcome to visit our plywood factory.We are looking forward to hearing from you.


Why Choose us 

1.25 openings hot press machine with loader and unload is widely used in producing plywood.(If you need to buy the loader and unload system,you have to control the thickness of plywood 3mm-25mm.we suggest that one hot press is doing the 3mm-18mm and other one is doing the 18mm-25mm).

2. The main frame is welded by standard steel plate, good design of frame and structure, strong rigidity, and ensure high pressure.We will put the frame of hot press into the annealing furnace for three days.This step helps our machine to extend usage life and not easy to be out of shape.
3. Microcomputer control system is made by good quality hydraulic unit, fast press,accurate press, high efficiency.The system is made by ourselves.We have the plywood factories which help us to update the control system in a period of time.It is controlled automatically.When the temperature or the pressure is too high ,it will be decompression.

3. The hydraulic circuit is composed of integrated blocks and compact in structure, ensuring accurate and reliable action of the system.
5. we can make according to customers' request.

Client Satisfaction 

It remains our prime aim to maintain offered machinery quality standards so as to garner multiple customers besides maintaining good terms with the old ones. Over the years we have been offering an unmatched quality product range and have successfully attained the trust and reliance of our esteemed 

Client Satisfaction 

It remains our prime aim to maintain offered machinery quality standards so as to garner multiple customers besides maintaining good terms with the old ones. Over the years we have been offering an unmatched quality product range and have successfully attained the trust and reliance of our esteemed

 

shipment (2)

IMG_6727


Inquiry