How to extend the service life of copper clad laminate hot press?

- Mar 09, 2020-

 Proper use of the copper-clad laminate hot press can extend its service life, but some customers do not use the copper-clad laminate hot press in accordance with the relevant instructions when they are used, resulting in some unnecessary problems during use.

There are two ways to extend the service life of the copper-clad laminate hot press. One is to use it correctly according to the instructions, and the other is to pay attention to maintenance after use to keep the equipment clean and complete. The above two methods will be introduced in detail by the copper-clad laminate hot press manufacturer.

The prerequisite for the correct use of the machine is to ensure that the various wire heads are connected properly before starting up and to observe whether the various parts are operating normally and whether there is noise after starting up. When heating is needed, press the "Heating" button to set the time required for timers such as "pressurization timer" and "lamination timer". After processing the product, remove the product and turn off the heating switch, vacuum switch and key power switch at one time.

In addition, you should also pay attention to the maintenance of the copper-clad hot press, check the product for residues in the machine, and wipe it with a clean cloth to keep the equipment clean and complete. If not used for a long time, the oil should be cleaned.