Installation and temperature control of heating pipe of single-sided hot press

- Jan 10, 2020-

Manufacturers of single-sided sticking hot presses need to check it frequently when using it, and if any problems are found, they should be repaired or checked in time. Then, for the installation of heating pipelines, it mainly depends on whether it is steam or thermal oil for heating.

If the single-sided hot-pressing machine is used for steam heating, connect a stream header to the hot-pressing machine, and then connect a steam inlet pipe to each hot plate. The outlet pipe is collected on the main pipe, and a steam trap is added. The heat transfer oil heating is more complicated, mainly to form a circulation circuit.

When installing, be sure to follow the operating instructions, and also check other components, etc., if any loosening is found, it should be repaired in time. When using it, it should also be maintained frequently to ensure its effectiveness. And we need to pay attention to the maintenance and inspection of equipment by professional technicians.

In many industries, single-sided hot presses are used when processing. If you want to improve its efficiency, there are some specific measures. For example, if the working temperature of the plate is below 180 degrees, you can use steam heating and cooling. Water is cooled.

Secondly, if the working temperature of the flat plate is above 180 degrees, the heat-conducting oil is used as a heat transfer medium for heating. Of course, there are many ways and methods, we can judge according to the specific situation when operating, but the premise is to ensure the normal operation of the device and never exceed its power use.