The constant temperature hot press is a kind of hot press, which can always operate at a constant temperature, and is a device widely used in the LCD panel assembly process.
Its primary function is to make a mechanical and electronic connection between ITO and ACF and FPC on the liquid crystal panel. With the rapid development of domestic LCD operations in recent years, the equipment industry related to it has also developed rapidly. The constant temperature hot press belongs to the branch semiconductor equipment of the electronic manufacturing equipment, so the precision of the equipment is relatively high, and it is generally equipped with a visual system. The equipment design generally blocks the air pollution components such as oil pollution, so the general accessories use cylinders, fine linear slip Rail, etc., and the air machine that provides the air source is an oil-free air machine. One is good for the life of the equipment, and the other is that it will not cause large oil particles to the working environment.
Its structure is composed of hot pressing components, fine-tuning fixtures, vision system, and other parts.
According to the equipment method, the constant temperature hot press can be divided into vertical constant temperature hot press and desktop constant temperature hot press. According to the hot head parts, it can be divided into single head constant temperature hot press and multiple heads constant temperature hot press. According to its function, it can be divided into simple constant temperature hot press and multi-function constant temperature hot press.
Operating conditions of constant temperature hot press
The normal operation of the constant temperature hot pressing machine needs to be satisfied with the following conditions. The power voltage of the machine location is not firmly small, the ambient temperature is less than 30 degrees Celsius, and the relative humidity is less than 80%.
The orientation of the machine should be far away from the vibration source, the direct sunlight and the influence of heat radiation should be prevented, and the influence of humidity and airflow should be prevented. If there is a vibration source near the machine tool, anti-vibration grooves should be set around the machine tool. Otherwise, it will directly affect the processing accuracy and stability of the machine and will cause poor contact of the electronic components, causing disadvantages and affecting the reliability of the machine. It is better to use a class 10,000 clean room with no vibration source nearby.