How To Make Material Not Sticky Hot Press

- Jul 17, 2018-

1. Want to let phenolic resin adhesive plate Non-stick Hot Press, what good way? Want to let phenolic resin adhesive plate Non-stick Hot Press, that is, hot press in the use of the process, will not be bonded to this problem, then, it is possible to increase the temperature of the mold appropriate, so that the smoothness of the product to further improve, thus, to solve this problem very well.

In addition, can also be configured with electrical heating mold temperature machine, thus, to achieve uniform mold temperature control, improve product quality and production efficiency.


2. Three pressure two hot press, it should use how large heat conduction oil stove? This problem, in the hot press manufacturer Wuxi Huasheng, it is not difficult to answer, therefore, they give the specific answer, is: Three pressure two hot press, it should be equipped with a large heat conduction oil stove, is to calculate the specific power, and know its use temperature and heating time, so that can carry out the choice of the specifications of the heat-conducting oil furnace,   And get the correct result, thus, to let the hot press work smoothly. 


3. The cushion in the hot press, does its rubber have service life?

Is there a requirement for its use time? The cushion in the hot press, the use of its rubber is based on the equipment design requirements and use of the frequency of these two to determine, so, its use of time, is not mandatory requirements, and, for its service life, is the same. When rubber deformation but not in time to recover, or is not enough, is to replace the new, at this time, can not continue to use.