Veneer and Plywood Hydraulic Hot Press Machine

Veneer and Plywood Hydraulic Hot Press Machine

600T Hydraulic Heat Press Machine is one of main products in our company. If you like,welcome to inquiry,we are all here to help you.
Chat Now

Product Details

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for hydraulic plywood cold press machine, Automatic Four Sides Trimming Saw, veneer glue spreader. We have notable technological innovation capabilities, forming a good basic platform for our enterprise development. The dawn of the new century has given us vigorous vigor, innovative personality and the courage to keep making progress. We should practice social responsibility, contribute to the society, and realize the return to society with industrial development.

Our Product

Our company is mainly specialized in producing the hydraulic heat press(including main hot press, hot platen (Q235 or Q345),hydraulic system, Electric control system(PLC: Vigor from Taiwan, Touch Screen:JIETONG from Taiwan),oil cylinder, steam system(Automatic constant temperature and drain steam),steam hoses);cold press, short-period laminating line, automatic conveyor line, automatic cut cross and rip saw line, multi-chip saw, lift table, glue mixer machine, glue spreader machine, small light side pressure hot press machine, synchronous side pressure hot press machine, hot press veneer drier and so on.

  Product Application

A variety of best selling specifications are 3*6ft, 3*7ft, 4*4ft, 4*8ft, 4*10ft and 5*10ft of plywood, particleboard, high and medium fiber board, film-faced board, construction formwork and block board. What's more, we also accept the OEM, ODM as well with good services, perfect quality and short delivery included.

  Operation method of plywood hot press

①Turn on the power of heat press to check whether the equipment parameters are within the specified range.②Put the hot-pressed product into the hot -pressing fixture to fix it, and do not touch the hot pressed aluminum plate with your hands to prevent burns.③Leave both hands out of the aluminum plate range of the hot press, check that there is no abnormal condition and press the hot press switch to press it down.④The heat pressure will rise automatically after the specified time. In case of abnormal situation, press the emergency switch quickly.⑤Do not put any debris on the top of the heat press or next to the switch to prevent danger.

   Precautions for hot pressing of plywood

  Hot press time: there is 16-24% resin glue in the backstage of veneer dipping, polycondensation reaction occurs during the hot pressing curing process, which will release a lot of heat. The thickness of the product is too large, and the greater the heat released. Therefore, when the product thickness is greater than 25mm, press for 4 minutes/per/mm of product thickness. When the product thickness is less than 25mm, press for 5 minutes/per/mm of product thickness. The hot pressing time is calculated only when the unit pressure and the temperature of the hot pressing plate reach the specified value. ②Heat pressing temperature: hot pressing temperature during loading:40-50 degrees Celsius; hot pressing temperature:145-150 degrees Celsius; hot pressing temperature when slab unloading:40-50 degrees Celsius. ③The time required for the temperature of the board to rise to the  hot pressing temperature: when the product thickness is greater than 25mm,30-40 minutes; when the product thickness is less than 25mm:20 to 25 minutes.

600T Hydraulic Heat Press Machine
Nominal Total Pressure6000KN 
Rated Pressure:25MPa25MPa
Size of Hot Platen1050*2100*42MM(Q235 or Q345,double inlet and outlet)
Quantity of Hot Platen21PCS
Specification of main oil cylinder 280*3PCS(WUXI)
Interlayer spacing:70MM
Overall Size3055*1050*4250MM
Total Weight28000KG
Heating mediumSteam, Oil and Water
Closing time40S
Power18.5kw 
Packaging Detailsin nude
Delivery Time30 days



18layers 600T  Hydraulic Heat Press Machine For Plywood 1(1).jpg 



Since we use standard assembly line production equipment, our Veneer and Plywood Hydraulic Hot Press Machine is more formal, reliable in quality and inexpensive. We have established a complete set of management and quality control systems based on the means of lean production. Please contact us freely.
Hot Tags: 600T hydraulic heat press machine, China, suppliers, manufacturers, factory, wholesale, best, buy, price, for sale, melamine machine, 2400MM Plywood Glue Spreader, glue spreader for plywood, 5M Hydraulic Lifter For Hot Press, diesel fired boiler, automatic saw

Inquiry

You Might Also Like